Steps to Clean Window and Door like a Pro

 I am sure you have never met a single human who gets enthusiastic after hearing about any prospect of cleaning unless you know Monica Geller from Friends. Cleaning screens or doors is a chore that almost all of us put off till we know we can’t avoid it any longer. If it were up to me, I would keep the task at bay until my window turns opaque. But unfortunately, that can’t be possible because dirty windows won’t just obstruct our view, but they will deteriorate the air quality inside our house. Therefore it is suggested that depending on the dirt that is stuck on your window screen and door, ensure that you clean them at least once or twice a year.

There are a lot of cleaning methods to clear off the stored dirt, but we are here to tell you DIYs that will kill the monotony of this job and, at the same time, complete your chore. So if you have an unreachable rusted window screen or dirty door, pick up your lint roller, vacuum, and a toothbrush with a soapy bucket and hit where there is dirt. We are sure once you’ve embarked on this cleaning spree step to clean the window and door, you will be a pro. Without wasting any time, let’s dig into the steps.

How to Clean Removable Window or Door Screens

Removable windows and door screens are relatively easy to clean as you can avoid the ladder and splatters steps to clean glass panes. The task is usually simple but remember that if you are cleaning all the windows and door screens in one go, label them up using masking tape or number it up on the unnoticeable part. This will ensure that you can simply remove and replace the window because the sizes vary, and you definitely won’t want any hustle.

Things You Require for the Task

You require only two essential supplies for cleaning removable windows, and door screens that are water and household ammonia. When it comes to tools, store a tarp or door cloth, vacuum with a dusting attachment, hand duster, sponge, bucket, microfiber cloth. You also require a scrub brush, water hose (with spray attachment), old towels, and gloves. Don’t miss the rubber gloves because we are using ammonia.

Steps to Clean the Removable Window or Door Screens. 

Instructions to clean the removable window and door screens are pretty straightforward. In fact, all you need to do is follow the four simple steps mentioned below.

Step 1: Remove the Dust and Spider Webs

Here’s how you can remove the dust, spider webs, etc.:

• Start by laying a tarp/ drop cloth over the deck and patio.
• Then lay each screen down flat. Remember to label or number it with a mask tap.
• Use the disposable duster (sponge or cloth) to remove the dust, spider web, or pollen. Otherwise, you can also use a vacuum cleaner, and attach the dusting attachment to it, and carefully wipe off the dirt.
• Once a side is cleaned, flip it over (on the clean towel side) and clean the other side using the same procedure.

If there is no access to the work area outside your home, you can easily clean the bathtub screens; just make sure that you lay an old towel or a drop cloth to prevent scratches or clog. After that, follow the exact same procedure to clean the screens.

Step 2: Mix the Cleaning Solution

The next step is to make a cleaning solution for which stick to the exact quantity and steps stated below.

• Take a large bucket and keep the ratio of ammonia to water 1: 3. Wherein if you take one-part of ammonia mix it into three parts of water.
• Stir the mix well
• Based on the availability, dip either a sponge or microfiber cloth in the solution you created and gently and carefully wipe the screen frame and edges.
• Don’t sprinkle the solution on the screen because it might leave marks.
• Use a clean cloth to wipe the screen if you spilled excess solution on the screen.

The prime prerequisite of this procedure is rubber gloves. Don’t forget them, as ammonia can be harsh on your skin.

Step 3: Rinse and Dry

The third step of the procedure is rinsing the screen and drying them. For which read these four steps.

• Use a garden hose or spray tool, clean it well and use it to rinse both sides of the screen efficiently.
• Avoid using a pressure washer or forceful spray as it might bend the screen or scratch the glass.
• Lay the screens to clean in the sun or air dry because if you skip the step, water and ammonia solution might promote rust.
• If you need to put them back again, quickly use a clean towel and pat it dry. Don’t swish the screen with a hard hand as it might harm.

Step 4: Clean the Window Frames and Reinstall the Screens

After rinsing and drying the screens, the next step is to clean the frames and reinstall them.

• There is a fair chance that the dust and pollen are collected in the corners/crevices of the frame. So before you move on to reinstall the cleaned screens, take the vacuum or duster to clean the edges. Ensure it is semi-dry or completely drained, a duster that is dripping wet as it might promote rust.
• After cleaning the screens, carefully reinstall the completely dry screen.

How to Clean Non-Removable Door or Window Screens

Cleaning non-removable windows is a little complicated and elaborated because you can’t shift the screens’ placing. There is nothing to fret about as we have got it capped for you. Check out the easy instructions and learn how to perform the cleaning spree optimally.

Things you require for the Task.

It would be best if you had exactly the same supplies and tools. There are just two additions: you require at least two buckets and an eye protection cover.

Steps to Clean the Non-Removable Window and Door Screens

Instructions to clean the non-removable window and door screens just like removable screens are pretty straightforward. You just need to follow the five specific steps mentioned below.

Step 1: Protect the Surrounding Area

The first step on the list is to clean the screens by protecting the area around the window and door because no one would want to clean one thing and spill dirt on the other. Therefore, lay a towel or cloth wherever you are working to protect your carpet or floor.

Step 2: Remove the Dust

As the window/door screen is a fixture, you certainly won’t have the option to lay it flat or bend the same. Therefore, dusting using the dust vacuum tool will be futile. Stick to the disposable duster and carefully wipe off the excess dirt and pollen from it. Once you have dusted, attach the crevice tool on your vacuum to remove all the leftover dust from the frame and edges.

Step 3: Prepare the Cleaning and Rinse Solutions

To clean the window and door screen, start by mixing ammonia and water in a 1: 3 ratio in a bucket. After that, fill the other bucket with plain water to rinse the solution.

Step 4: Wipe Down the Screen

For this step, put on your rubber mask and use a sponge or any soft-bristled brush and sprinkle ammonia solution on the window. As the window is exactly on the eye-level, wear eye protection. Wipe the window screen, frame, and edges to remove any and every dust or grime present there. Once the screen is cleaned, take a clean cloth and wide down the screen, and rinse the frame.

Step 5: Completely Dry the Screen

Use a clean towel and pat the window gently on both sides to completely dry out the excess water.

The process of cleaning window and door screens seems to be extremely simple but ensure that you know how to detach and reattach them. If you don’t know the task, avoid experimenting instead; seek help from a professional cleaner who comprehends precisely what they are doing. Moreover, it can be a little risky as ammonia is involved in the process of contact trained individuals from Run Errand Run. The company employs one of the best employees who are occupied and trained with the best tools and techniques. So, visit the official website of Run Errand Run and book an appointment for your home tasks today.

Source: Steps to Clean Window and Door like a Pro